Magnum ME2012 2000W Inverter 12v W/100A PFC Charger
Reliable Mobile Power from Magnum Energy
The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the power.
The ME Series Inverter/Charger is loaded with features:
Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers.
Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you.
Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 60 Amp transfer service is available on all models.
Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.
Accessories and Options*
Remote control: For convenient finger-tip operation, including the new one-knob? programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
|Inverter Specification ||ME2012 ||ME2512 ||ME3112 |
|Input battery voltage range ||9 - 16 VDC ||9 - 16 VDC ||9 - 16 VDC |
|Nominal AC output voltage ||120 VAC ||120 VAC ||120 VAC |
|Output frequency and accuracy ||60 hz 0.1Hz ||60 hz 0.1Hz ||60 hz 0.1Hz |
|1 msec surge current (amps AC) ||60 ||100 ||120 |
|100 msec surge current (amps AC) ||37 ||45 ||50 |
|5 sec surge power (real watts) ||3700 ||5000 ||6000 |
|30 sec surge power (real watts) ||3450 ||4500 ||4800 |
|5 minute surge power (real watts) ||3100 ||3500 ||3950 |
|30 minute surge power (real watts) ||2400 ||2900 ||3500 |
|Continuous power at 45° C ||2000 VA ||2500 VA ||3100 VA |
|Maximum continuous input current ||266 ADC ||333 ADC ||413 ADC |
|Inverter efficiency (peak) ||95% ||91% ||90% |
|Transfer time ||16 msecs ||16 msecs ||16 msecs |
|Search mode ( Typical) ||5 watts ||5 watts ||5 watts |
|No load ( 120 VAC output ) Typical ||20 watts ||23 watts ||25 watts |
|Wave Form ||Modified Sine Wave |
|Charger Specifications |
|Continuous output at 45° C ||100 ADC ||120 ADC ||160 ADC |
|Charger efficiency ||85% ||85% ||85% |
|Power factor ||> .95 ||> .95 ||> .95 |
|Input current at rated output (AC amps) ||15 ||18 ||21 |
|General Features and Capabilities |
|Transfer relay capability ||2 legs at 30 A for 120 V/30 A or 240 V/60 A service |
|Five stage charging capability ||Bulk, Absorb, Float, Equalize, and Battery Saver™ |
|Battery temperature Compensation ||Yes, 15 foot battery temp sensor standard |
|Internal cooling ||0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
|Overcorrect protection ||Yes, with two overlapping circuits |
|Conformal coating on PCB's for corrosion protection ||Yes |
|Over temperature protection ||Yes, On Transformer, MOSFETS, and battery |
|Stainless steel fasteners for corrosion protection ||Yes |
|Dual AC branch rated output breakers ||On the ME2012-20B only - AC breakers in 20 amp ratings |
|Listings ||ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 |
|Warranty ||3 Years |
|Environmental Specifications |
|Operating temperature ||-20° C to +60° C (-4° F to 140° F) |
|Nonoperating temperature ||-40° C to +70° C (-40° F to 158° F) |
|Operating humidity ||0 to 95% RH non condensing |
|Physical Specifications |
|Dimensions (h x w x d) ||13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) |
|Mounting ||Shelf (top or bottom up) or bulkhead (vents up) |
|Max operating altitude ||15,000 feet |
|Weight ||37 lb ||41 lb ||46 lb |